Potion Nogg

THE potion to always have with you. It can do several things for you, but levitation is the most wanted effect.
Beware though, many have become addicted to it.

Warning : Bacteria can lodge in the overlapping layers of the print. The contents of the potion should not be consumed!
Content : The kit consists of 4 pieces to assemble:
  - A gold base
  - A gold outline
  - A transparent potion
  - A gold cap
Dimensions (in cm): Length: 6.7 / Depth: 6.7 / Height: 8.0.
Filaments used:

Glue is required during assembly.
A: Cap / B: Potion / C: Outline / D: Base

Lightly insert cap A into potion B, be careful to not apply too much force at the top of potion B.
Then turn the cap until it is completely screwed in. Stop before this applies too much force to the top of potion B.
Unscrew cap A and clean the residue from the top of potion B. Next time it will become easier to screw it back on.

Place outline C around potion B by inserting it from the top.
Then, apply glue at the 4 corners of base D put B/C on it. You may also put glue in the middle of base D.
Press the corners of base D and outline C firmly together to spread the glue and make them stick.

Once the glue has set, you can use a funnel or a piece of paper to pour a liquid into the potion B.
For a nice nogg color, water mixed with blue or green liquids works well. Up to you to find the best brew!
Then close potion B with cap A.

Assembly video

Due to the way the potion is printed, its upper part is a little fragile.
Be careful not to apply too much force on it so as not to break it.

The gold filament can be hard to print while maintaining its texture effect.
Lines may be visible on the walls of the gold parts.
In rare occurrences, holes may also appear.

The lower side of the gold base may contain traces left by the first layer of printing.

Before each delivery all potions will undergo a leak test and the cap will be fully screwed on once.
All parts will undergo a quality control inspection before being sent.